At this time’s House owner Radio Podcast | December 10, 2022

This week, hear learn how to substitute two small home windows with a big one and be taught why chilly climate could make propane much less efficient. (PC Pictures, Getty Photographs/gmnicholas, Getty Photographs Signature)

Notice: Audio from the most recent episode of “The At this time’s House owner Radio Present” is offered Sundays after 4 p.m. CST.

Hour 1 

Hear learn how to set up laminate flooring round a door jamb, restore cracks in plaster and extra. 

Putting in Laminate Flooring Round Door Jambs

Reciprocating saw on top of laminate flooring with saw dust
To put in laminate flooring round door jambs, you’ll have to trim the jamb with a noticed so the flooring can slip below it. (Ocskaymark, Getty Photographs)

A caller asks: “How do you narrow laminate flooring to suit neatly round door jambs in a cased opening between two rooms?”

More often than not, you’re not slicing the flooring, however you’re slicing the underside of the jamb the place it hits the ground.

A device known as a jamb noticed is ideal for doing this. It’s like a round noticed, however the blade is turned 90 levels so you’ll be able to simply slide it into the jamb. You’ll be able to hire one in all these from a house heart.

When you don’t need to hire a jamb noticed, you’ll be able to take a scrap piece of the flooring and put it on the subfloor towards the jamb to get its actual top. If there’s any sort of underlayment that goes below the laminate flooring, put that below it as effectively. 

Then, use a reciprocating noticed or a hand noticed to chop slightly bit off of the jamb so the flooring can slip below it. The thickness of the blade ought to go away sufficient room for the laminate flooring to increase and contract.

Watch: Set up Laminate Flooring

Fixing Cracks in a Plaster Wall

Crack in beige plaster wall
When you see a crack in your plaster, don’t panic! Small cracks could be repaired pretty simply. (Courtesy of Wes Burchell)

“What’s the easiest way to restore this previous plaster wall?

Working with plaster is slightly like working with drywall, however the ultimate end could be difficult to match.

The very first thing you want to do is scrape out the crack utilizing the pointed tip of a can opener. What you’re doing is widening that crack right into a v-shaped opening to carry extra plaster compound. Make it at the very least a quarter-inch large. 

Then, vacuum the mud out of the crack and clear the floor round it with a humid towel to take away any mud.

Then, you employ joint compound or patching plaster to fill within the crack.

As soon as the crack is patched, prime and paint it to match the remainder of the wall. With any paint restore, don’t simply paint the restore space. Unfold the paint out at the very least a few toes in every path. 

Watch: Restore Cracks in Plaster Partitions

Hour 2

Hear a caller’s Easy Answer suggestion: learn how to substitute two small home windows with a big one, and extra. 

Easy Answer Suggestion 

Split image of effervescent tablets dissolving in water and tap water flowing down the drain
The bubbling motion of denture tablets loosens buildup in a drain and makes it simpler to flush away. (LdF, Getty Photographs Signature/laymul, Getty Photographs)

Diane McClaskey in Missouri has a possible Easy Answer suggestion for cleansing a sink drain.

After eradicating the pop-up stopper, add six to eight denture cleansing tablets to the drain, and add just a bit water. Wait to let the cleansing start, and add slightly water as wanted till clear. 

The bubbling motion will assist to interrupt up any dust or grime and go away your sink glowing clear!

So why would this work? The principle ingredient in denture cleansing tablets is sodium bicarbonate, generally often known as baking soda.

This works equally to our Simple Technique to Clear and Deodorize Your Sink Easy Answer.

Changing Two Small Home windows with a Giant One

Simple home office with large window
Changing two small home windows with a big one is an effective way to let in additional gentle and enhance your own home’s curb enchantment. (PC Pictures, Getty Photographs)

A caller desires to interchange two small home windows with a bigger one in her dwelling. There’s a six-inch wall in between the home windows, and she or he was advised she wanted to place in a header.  

“I don’t understand how to do that. Are you able to clarify please?” she asks.

While you take a window out, you want to substitute it with one thing to fill that void. A header mainly is a 2-by-4 to a 2-by-12. A header spans horizontally above the window to help its weight. This prevents the ceiling joists, roof rafters, and something above that could be bearing down on the window from sagging.

Nonetheless, it’s a really difficult mission. First, it’s a must to entry that space, and that’s completed by slicing the drywall or plaster away from the within above the higher a part of the window opening so that you’ll have room to chop out no matter’s there and put within the new beam. 

Except you’re excellent at carpentry work, I counsel calling an expert to do that. The very last thing you need is any sagging on the window down the street. 

Knowledgeable can even guarantee the brand new window is sealed correctly to keep away from drafts and vitality loss.

Name your native residence builder’s affiliation and ask for his or her suggestions. 

Can Chilly Temps Injury a Propane Tank?

Propane tank against wooded background
Chilly temperatures may cause propane to change into much less efficient. (gmnicholas, Getty Photographs Signature)

A caller says: “I’ve a backup propane tank that I retailer in my storage. It’s been there for over a yr. I can’t get my grill to begin with it. Does storing the tank for that lengthy in a chilly storage injury it?”

As a way to maintain propane in a liquid state, it needs to be saved below strain. Chilly temperatures may cause the liquid propane to condense, which might then lower the strain contained in the tank. 

Propane turns to a liquid at -42 levels C; if it will get that chilly or colder, the strain inside your propane tank will drop, finally reaching some extent the place it’s too low to successfully gentle a grill or different home equipment, in keeping with Lansing Ice and Fuel.

Deliver it inside and let it heat up and test the extent of gasoline. When doubtful, take it to get it refilled. 

Sooner or later, to maintain the strain greater, maintain the tank at the very least 30 % full always, and use a small insulated body shelter to guard the tank from colder temperatures.

Finest New Merchandise

MSI’s new peel-and-stick backsplash provides you the look of actual tile with out all the trouble of a standard thin-set software. Study extra >>

Easy Options

Drill holding a spool of mason line/nylon string by a screw inserted into the handle
Utilizing an influence drill to wrap nylon string round a spool will velocity up the method and reduce the probability of tangles. (3 Echoes Content Studio)

Quick and Neat Technique to Wind String onto a Spool — A spool of nylon string can be utilized for a lot of issues — normal crafting, fishing and searching, and laying mason traces.

The string is simple to unwind off the spool, nevertheless it’s not as simple to get again on after you’ve used it. Winding it by hand again onto the spool can result in tangles and uneven distribution. And finally, you’ve acquired an unusable mess that it’s a must to reduce up. Right here’s a significantly better, and sooner, answer: 

  • Take a screw and drive it by the tip of the plastic housing that the spool is on. Then, chuck it right into a drill. 
  • Activate the drill to the bottom setting, and identical to that, now you can use the facility of the drill to place the road again on the spool. 

It solely takes a couple of seconds to wind the nylon string again onto the spool! As you’re winding up the nylon string, slowly transfer it backwards and forwards alongside the spool. This manner, you don’t overload one facet or the opposite, and the string winds up neatly each time.

Watch: The Quick (and Neat!) Technique to Wrap String Round a Spool

Hand pouring Clorox toilet bowl cleaner gel into grout lines on a bathroom floor
A bathroom bowl cleaner’s spout makes it excellent for pouring into grout traces. (3 Echoes Content Studio)

Cheap Various to Business Grout Cleaners — When you have tile in your house, chances are high you’ve spent a while cleansing grout. Whereas there are a number of grout cleansing merchandise available on the market, you may need one thing in your house proper now that works simply as effectively — bathroom bowl cleaner. 

Common previous bathroom bowl cleaner that is available in a squeeze bottle can clear grout! Rest room bowl cleaner incorporates bleach, so it is not going to solely lighten grout stains, however it’s going to additionally kill any mould or mildew.

Plus, bathroom bowl cleaner is cheaper than grout cleaner.

Watch: Rest room Bowl Cleaner: The Cheap Various for Cleansing Grout

Merchandise and Hyperlinks Talked about

This web page incorporates affiliate hyperlinks. If you are going to buy a product from these hyperlinks, we’ll earn a small fee at no extra price to you.

Additional Studying

Radio Present & Podcast: Ship us your query!

When you have a remark, normal query about residence enchancment, or one thing we have featured on At this time’s House owner, please fill on this type: