Simple DIY Wall Mounted Folding Desk Workbench from a Door

Construct your personal DIY folding workbench on your storage in simply at some point! This newbie tutorial and woodworking plan makes use of a strong core door and cheap lumber to make a wall mounted folding desk for beneath $100, good for woodworking and different DIY tasks.

You may also construct a big folding moveable work desk or improve your storage workshop with a DIY desk noticed workbench with storage.

DIY Folding Workbench for the Storage

I’ve a love hate relationship with my storage.

I find it irresistible when it’s clear, and I can really park in it.

I hate it (90% of the 12 months) when it isn’t!

I had this nice concept to make use of a paint lined folding desk as my work desk within the storage. In actuality, the desk changed into a dumping floor. After nearly each challenge we work on round the home the instruments, and remaining elements find yourself on that desk. I’d share an image, however it’s too embarrassing!

I lastly had it final week, and cleaned every thing off and took the desk out of the storage. Now I would like a desk. So why not construct one?

Listed here are my “work desk” prerequisites:

1. In a position to be simply put away so messes can’t accumulate
2. Sturdy and powerful sufficient for constructing furnishings
3. Massive working space

Looks as if a fairly quick listing, however it’s what I would like! So after a fast flip all over the world large internet for inspiration I offer you The Wall Mounted Folding Desk Workbench.

I’m sharing all the information about tips on how to construct your personal (plus a fast DIY hack for a good sooner wall mounted folding desk!) so maintain studying for the detailed meeting directions.

This submit comprises affiliate hyperlinks. Be taught extra and skim our full disclosure coverage right here.

What makes this DIY wall mounted folding desk inexpensive and simple

This minimalist DIY folding workbench or desk has a number of key options:

• simple to construct (no over-engineering wanted right here!)
• simple to fold as much as clear up storage area
• offers you a big strong wooden work desk floor
• all for beneath $100 in supplies!

The key to this quick and simple wall mounted folding desk is that I used a solid core wood door as an alternative of plywood for the tabletop.

A solid wood door (unbored) is a perfect answer for a workbench floor in a storage or shed (or for a wall mounted folding desk desk) as a result of it’s very easy, very robust, no cuts required. And it’s a fairly inexpensive different to a sheet of plywood or two, with added sturdiness. 

It simply takes a couple of dollars in different lumber and a few hinges to show a door into a big fold-up workbench on your storage or numerous websites the place you want a drop-leaf desk.  

You may alter the scale to make a standing desk or a laptop computer laptop desk for extra lecture room, or perhaps a space-saving eating desk for a small house or slim room. This drop-down folding desk would make a terrific laundry room desk for folding garments, too! 

No casters, no cabinets — only a robust and easy wall-mounted folding desk that takes up no ground area.

You’ll want a pocket hole jig to connect the entrance desk skirt. Aside from that, a miter noticed and nail gun make the construct go sooner, however you in case you are simply beginning out and don’t have the instruments, you may simply use a hammer and a hand saw with a miter box. Or perhaps it’s a superb time to put money into a round noticed or a miter noticed!

Workbench Dimensions and Changes

The completed DIY folding workbench measures 36 inches (D) x 80 inches (W) x 41.25 inches (H) when constructed as proven. You may alter the peak to your best standing desk peak, in addition to adjusting the bench prime width and depth through the use of a 78″ or 84″ solid core door.

• I used a 36×80 non-bored solid core hardwood slab door to make this huge wall-mounted work desk. Regulate the lengths of the 80″ lumber cuts in case you are utilizing a 78″ or 84″ door as an alternative to suit your accessible wall area.
• The peak of the folding workbench floor as listed is 41-1/4″. For a taller or shorter workbench, alter the size of the legs (and the peak that the ledger board is mounted).
  • Customary bar peak is 42″ however for my (common) peak the very best standing desk peak is just a bit shorter than that, so I put the work bench peak barely decrease however nonetheless tall sufficient to make use of a regular barstool.
  • Ensure that you may attain the highest of the desk when folded to safe the latch.

DIY Folding Workbench Materials Record

Right here’s what you have to construct your personal fold-up storage work desk — only a strong core door, 4 boards, and a few hinges and {hardware}. You would possibly have already got a few of these supplies in your scrap pile.

In search of a discount? You’ll want to examine your native Habitat For Humanity ReStore for constructing supplies and {hardware}!

Lumber

When selecting lumber, make sure you observe the following pointers and tips to decide on the very best and straightest boards. That is particularly necessary if you end up utilizing cheaper cuts like furring strips.

Different supplies and {hardware}

Notice: There are a number of methods you may safe the fold-up workshop desk to the wall. You could possibly use hook and eye latches, a pair items of scrap wooden, a barrel bolt lock, and so on. I selected the heavy-duty hasp as a result of it’s robust, simple to put in, and locks simply.

Beneficial instruments

Lower Record

• Ledger: minimize 1 – 2×6 @ 80″
• Workbench Assist: minimize 1 – 2×4 @ 80″
• Leg Assist: minimize 1 – 2×4 @ 6″
• Hinge Helps: minimize 2 – 2×4 @ 2″
• Legs: minimize 2 – 2×2 @ 38″
• Desk Skirt: minimize 1 – 1×4 @ 80″

Components Preparation

Within the leg assist (2×4 @ 6″), drill 3 pocket holes alongside one lengthy edge.

Pre-drill 3 holes by means of every hinge assist piece (2×4 @ 2″) for attaching later.

Within the desk skirt piece (1×4 @ 80″), drill pocket holes 2″ from the ends, and about each 8-10″ alongside the size of the board.

Evenly sand all items. You may seal with an non-obligatory coat of poly now or after constructing.

Tips on how to Construct a DIY Folding Workbench

Step 1: Mark The Wall, Ledger, and Wall Studs

First, discover the middle of the wall area the place your desk will go — ensure your 80″ desk will match! Mark the 40″ heart on the wall.

Subsequent, mark the peak of the 2×6 ledger, which can be 41-1/4″ from the ground. If you’re taller or shorter, you may alter this peak to your desire. You’ll additionally want to regulate the size of your 2×2 folding workbench legs.

Mark the middle (40″) of your 2×6 that you just minimize @ 80″.

Discover and mark the stud areas. In my storage the partitions weren’t painted so I may simply see the place my wall studs have been. It would be best to discover and mark the place your whole studs are earlier than you dangle your 2×6 ledger board.

Step 2: Grasp the Ledger

The ledger will maintain your entire DIY folding workbench to the wall, so make sure it’s stage and well-secured to the wall studs with heavy responsibility fasteners. You could want an additional set of fingers for this step. 

Match the 2 heart marks from the wall and the two×6 ledger. Place the extent on the board and ensure it’s stage at 41″.

Utilizing the end nail gun, place 3 or 4 nails in studs to carry the 2×6 in place.

End up by drilling 2 – 3″ screws by means of the 2×6 at every wall stud location.

Step 3: Grasp the two×4 Workbench Assist

Measure down from the highest of the ledger board 1-3/4″. This would be the mounting peak on your 80″ 2×4 workbench assist, and can permit the folding desk to take a seat on the two×4 whereas in use, including stability to your desk.

This subsequent step is rather like hanging the two×6. The highest of your 2×4 must be in your 1-3/4″ mark. Be certain that the ends are flush with the two×6, stage the two×4, and fasten with 3-4 nails as earlier than.

Then, drill 2 – 3″ screws by means of the two×4 into the two×6 at every stud location.

Step 4: Connect Hinge Helps to Desk Prime

Now it’s time to work on the precise desk!

Except you could have tremendous human energy you want somebody that can assist you transfer your strong core door to an acceptable work location. In my case it was on the driveway as a result of I didn’t have a piece desk! Sawhorses are a terrific addition to your workshop to raise your work on a challenge like this.

Measure on the underside of your door 3-1/2″ from the entrance nook on either side. Place the 2x4x2″ hinge assist items behind the mark. You should use clamps to carry in place as properly.

Screw 2×4 items into place utilizing 2-1/2″ or 3″ screws. (I pre-drilled 3 holes in these items so that they didn’t cut up once I drilled screws into them.)

For added safety, you may also use wooden glue with the screws.

Step 5: Connect the Desk Skirt

Connect the desk skirt to the underside of the workbench prime at 1-1/2″ from the entrance edge, utilizing pocket gap screws.

To put in the entrance skirt piece I made a jig to hurry up the method.

I used a leftover piece of the two×2 and nailed it to a bit of 1×4. Then I positioned the two×2 aspect on prime of the door, and pressed the skirt in opposition to it as I screwed the skirt to the underside of the desk utilizing the pocket holes. Be certain that your ends are flush earlier than you begin attaching with pocket gap screws!

Step 6: Connect the Workbench Legs and Hinges

Connect the small hinges to the 2x2x38 legs. Mark heart on the other aspect of the leg from the hinge on every leg, and mark heart on the skin of the 2x4x2 items mounted to the desk.

Line up the middle marks, and fasten the opposite aspect of the hinge to the within of the 2x4x2 block.

I initially used the screws supplied for this step, however discovered they allowed an excessive amount of motion when decreasing the door. So I changed them with 2″ screws as an alternative.

Step 7: Connect the Leg Assist

Fold your legs so that they sit in opposition to the underside of the desk, and fasten the 2x4x6 items utilizing pocket holes  and a couple of″ screws so the board sits in opposition to the desk legs. That is the place the legs will relaxation when the desk is folded up.

Step 8: Connect the Desk to the Ledger with Hinges

Time to name in your heavy lifting helper once more! Whereas holding the legs in place, carry the work desk to the ledger board you could have already connected to the wall.

That is the second of reality. Enable the legs to fold down, and place the again of the desk on the two×4. Your desk ought to sit firmly on the bottom. You could must straighten the legs so that they sit flush on the bottom and on the two×4 blocks on the underside of the desk.

Tip: If the ground isn’t precisely stage and also you desire a safer leg contact with the bottom, use a big washer beneath the leg.

Now measure a 1/2″ hole between the two×6 and the again of the desk. It will permit the hinge to maneuver freely.

Connect the hinges to the desk and the two×6. I put in 2 hinges 4″ from the sting, and one within the heart.

Check out these hinges with a helper! Fold your door up, and mark the place the highest edge meets the wall on a wall stud as near the heart of the desk as attainable. Decrease your desk down once more. It’s enjoyable isn’t it!

Two extra closing touches and you might be achieved!

Step 9: Set up the Hasp

This hasp and latch are the important thing to the “fold-up” a part of the folding workbench. The twisting a part of the hasp goes on the aspect of the work desk, and the hinged a part of the hasp goes on the wall (within the wall stud for safe attachment).

Measure the place that stud is in relation to the tip of your desk. Switch that measurement to the entrance of your desk, and fasten the twisting piece of the hasp to your desk.

Set up the hinged a part of your hasp 1/2″ above the road you marked and the identical distance from the tip of the desk.

Now you need to have the ability to fold your desk up and lock it in place! Attempt it out!

Step 10: Apply End Coat (Non-compulsory)

The ultimate step is non-obligatory. I brushed on a coat of polyurethane to guard my desk prime. This one is completely as much as you!

I hope you take pleasure in your new CLEAN workspace!

Subsequent up for me is cleansing up the storage area, and I’m contemplating including pegboard beneath the bench to retailer extension cords and different low-profile instruments and supplies.

Extra House Saving Options for Your Storage